Want a damage-free wall surface? Then, acrylic wall putty is your best choice. An acrylic wall putty is an alkali-resistant undercoat that protects your walls from cracks and other damages.
You can opt for this method for newly constructed homes to prevent damages in the future or to cover up an existing damage. Acrylic putty is a valuable material in construction.
In this article, we will look in detail at acrylic wall putty, including its features, benefits, and methods of usage
What is Acrylic Putty?
Acrylic wall putty is an alkali-resistant, water-based undercoat made with special acrylic binders. It has a peanut butter like consistency that seems white in colour. It helps cover up cracks or holes in walls and also acts as an undercoat before painting surfaces like walls and ceilings
Acrylic putty can smooth out any dents or cracks in the wall surface. Painting the wall after this process can give a rich, and flawless look. This method is time-saving and can extend the life of the paint coat, providing a new look to your home even after several years.
It can be used in both interior and exterior walls; you can particularly use it on wooden surfaces, concrete, plastered walls, asbestos, etc. This putty also helps repair broken tiles or wallpapers.
Features of acrylic putty
- Alkali-resistant: It prevents the wall surface from significant damage, like fading. It extends the life of your paint and gives a neat finish.
- Water-based: This acrylic putty is completely water-based and eco-friendly. Its low odour property makes it an ideal choice compared to solvent-based solutions.
- Gives a smooth white finish: One of the main features of acrylic putty is filling up the cracks or holes in walls easily. This leaves behind a smooth white finish that you can later paint upon, erasing the trace that there was even a crack before.
- Durable: Acrylic putty is strong and durable. It can last long and give your walls a smooth and sleek finish for several years.
- Dries quickly: Acrylic putty dries more quickly than other types of putty. It also has good adhesion and binds well with the wall soon after application.
How to use acrylic putty for your walls
Acrylic putty is easy to apply and can be applied using some simple techniques.
Prepare the surface
Before applying putty, ensure that the wall surfaces are uniform. Clean the wall and keep it free from dust or dirt. Ensure the wall is dry and smooth before applying the putty. You can also lightly sand the wall for better adhesion.
Get the tools ready
Go through the tools you might need to apply putty and get them ready. This might include a putty knife or a spatula. The size of these tools can be selected based on the application area. You can also get clean mixing tools if necessary.
Apply the putty
Use a putty knife to evenly spread the putty over the wall or any other surface. Ensure covering the entire wall without any cracks or holes. Use a broader putty knife to level the surface for a smoother look. Tricky corners might require spot knives or other such tools for coverage.
Let it dry
Give the putty adequate time to dry before starting the next step. Acrylic putty dries quickly, generally within a couple of hours.
Sand the surface
Make sure to sand the surface after applying the putty. This can remove any excess putty from the surface. Use sandpaper to smoothen the wall.
Apply primer
Apply primer to seal the putty into your wall. The primer will also be a good base for your paint, providing enhanced adhesion and a white base coat to ensure accuracy of paint colours.
Paint the surface
After the process is complete, you will get a smooth and sleek surface. You can check if the surface is dry and start painting the wall to your liking. Generally, atleast two coats of paint are required to ensure full coverage and uniformity.
Benefits of using acrylic putty for your walls
- Superior quality: Acrylic putty is of a higher quality than other types of putty. It gives a flawless look to your paint and enhances overall appearance.
- Non-toxic: Acrylic putty is non-toxic, making it safe to be used in homes where there are children or pets.
- Cost-effective: Though acrylic putty can be somewhat expensive, it is of high quality. This considerably reduces the number of coats of paint you need to apply to get the desired result. This can reduce your overall costs.
- Fast working time: It takes less time to set, so you can move forward to the next step quickly.
- Long life: Acrylic putty has a long shelf life and resists cracks or shrinks. It also protects the paint and prevents it from peeling off and fading.
Conclusion
Acrylic putty is an excellent material that helps to fill up cracks and other damages. Its thick, buttery consistency makes it easier to fill up the damage and make it look as if it was never there. Acrylic putty has more features than normal wall putty, Its superior quality and durability make it a material that is commonly used in construction and renovation projects.
Ensure you buy high-quality acrylic putty for your homes. You can consult a professional if you need help buying it.
FAQs
Yes, acrylic putty can be used both indoors and outdoors. Use it to cover up any cracks or dents in the surface. You can paint the surface later to make it look fresh and new.
Acrylic putty is highly durable and long-lasting. It helps prevent the walls from cracks and other damages.
It generally takes around 20–30 minutes to dry completely. Then you can apply primer and paint over the surface.