Water damage is not an issue that can be easily avoided in any building. Natural elements eventually wear down even the strongest, most advanced concrete structures. This can seriously reduce the aesthetic appeal and structural integrity of your property, which can significantly lower its value.
A waterproof chemical for walls can prevent these effects, preserving structural integrity and getting your business back on track. The type of chemicals you use will depend on the structure of your building.
Brick & Bolt, the leading construction company in India, employs industry specialists to guide you on the proper chemical waterproofing and how to do the job correctly.In this post, we will be covering everything about the best wall waterproofing solutions.
Top-Notch Chemical Waterproofing Methods
- Grout And Epoxy Injection
If you find cracks forming on your concrete, you can stop its spread and waterproof the site with grout and epoxy injection. Injected into cracks or by drilling holes into the surface, the chemicals penetrate the surface. The pressure injection of the grout reacts with any remaining water in the insulation to act as a sealant. It ends up producing a gel or foam where the crack used to be, forming a water and weather-resistant barrier. This method can be used in piping, tanks, tunnels, and foundational walls.
- Vinyl Ester Resin System
Another protective coating used on concrete surfaces is vinyl ester resins, which prevent acid and corrosion damage. The resin’s chemical properties form waterproof membranes to combat moisture and water damage. Vinyl ester can also be applied as a mortar or slurry mixture.
- Polyurethane Liquid
Polyurethane is a chemical membrane mainly used as a waterproofing material for roofing or exposed areas. It is a very flexible material, but is best applied on flat surfaces and without elevating the moisture level of the concrete. Should this occur, de-bonding of membranes can happen, which throws off the entire process. Although this wall seepage treatment is very effective, it is very expensive.
- Polyurea Coating
One of the most resilient and flexible protective coatings is polyurea. This is due to its polymer molecular properties. It is also known as water-resistant, abrasion-resistant, and extremely strong. Anti-bacterial properties are also found in Polyurea coatings.
- Bituminous Waterproof Method
Waterproofing concrete foundations is best achieved through the application of bituminous coatings. This is also known as asphalt coating: combined sand or gravel, a dark substance. Waterproofing properties depend on the polymer grade and adding fibre to the chemicals. This is another flexible substance offering value as a protective coating.
- Crystallisation Waterproofing
Chemically, crystallisation waterproofing is designed to resist the impact of key elements causing corrosion, such as CO2, NO2, and CO, as well as water damage. Depending on the surface’s porosity, the substance’s crystalline properties fill the gaps in the cement composition to keep water out. It can be implemented using either brush or spray methods. Chemicals penetrate deep into the concrete and are set to create long-term protection.
- Permeability-Reducing Admixtures (PRAs)
Several types of PRAs exist, all like the crystallisation waterproofing technique described above. The chemicals used are favourable as they act proactively to cause a reduction in the permeability of concrete. Furthermore, PRAs help to minimise dry shrinking, shield the concrete from thawing and freezing outcomes, and decrease chloride-ion actions by reinforcing sealing within concrete.
PRAs are frequently used on the concrete mix itself, which means that the plastic properties of the concrete are affected. In the whole of construction, it is most appropriate for architectural concrete that is exposed to rain or damp areas frequently.
Why You Should Waterproof Your Home: Benefits of Waterproofing
The following are some of the home waterproofing advantages –
- Saves you from challenges such as rising dampness caused by moisture penetration into the walls.
- Effective waterproofing chemicals reduce the harm caused by seepage, which interferes with the structural stability of a house.
- It can eliminate the chances of corrosion of metallic structures and gradual deterioration of wooden ones due to weeping.
How to Choose the Right Waterproofing Chemical?
Before choosing a waterproofing chemical for your house, consider the following factors. Here are a few of them.
UV stability
Look for the waterproofing solution’s UV stability during construction. The wrong selection may cause undesired degradation of the surface or some of its features may deteriorate drastically if exposed to direct sunlight. Therefore, it is ideal to use a product that is enriched with UV light and can take sunlight quite well.
Hardening Time
Select a waterproofing chemical that cures quickly. While some items require as much as 48 hours to dry, others require just a few seconds. So, choose wisely.
Binding capacity
If you are going to combine the substrate you have identified with another substrate, make sure that it has enough binding capacity and adheres well to the surface where it needs to be applied.
Durability
When embarking on waterproofing, ensure that the waterproofing solution you choose is durable. For this, you have to make sure that the product you have chosen can provide incredible elongation power as it lifts and inflates. Depending on the weather, this power sometimes decreases soon after its application. Consequently, there will be the least cracks, wear, and tear on the surface of your walls.
In addition, you also need to look at the testimonials of the brands from which you are about to purchase your waterproofing solution.
Conclusion
Choosing the right waterproofing solution matters a lot to maintain longevity and protect your property walls. But choosing the top notch construction company also matters to construct strong structures while keeping up with the tone of the space. Choose a trusted company like Brick & Bolt to meet your construction requirements. We hold decades of experience in constructing cutting edge structures that fulfil all your desires. With us, you receive a complete balance of appeal and strong structure. Get in touch with us today to construct your dream space.